3Com S7906E - Switch, Руководство по настройке

Страница: 2046 / 2621

3-2
To do… Use the command… Remarks
Set a rule numbering
step
step step-value
Optional
The default step is 5.
Create an IPv6 ACL
description
description text
Optional
By default, no IPv6 ACL
description is present.
Create a rule description rule rule-id comment text
Optional
By default, no rule description
is present.
Note that:
z
You can only modify the existing rules of an ACL that uses the match order of config . When
modifying a rule of such an ACL, you may choose to change just some of the settings, in which
case the other settings remain the same.
z
You cannot create a rule with, or modify a rule to have, the same permit/deny statement as an
existing rule in the ACL.
z
When the ACL match order is auto , a newly created rule will be inserted among the existing rules in
the depth-first match order. Note that the IDs of the rules still remain the same.
z
You can modify the match order of an IPv6 ACL with the acl ipv6 number acl6-number [ name
acl6-name ] match-order { auto | config } command but only when it does not contain any rules.
z
The rule specified in the rule comment command must have existed.
Configuration Examples
# Create IPv6 ACL 2000 to permit IPv6 packets with source address 2030:5060::9050/64 to pass while
denying IPv6 packets with source address fe80:5060::8050/96.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] rule permit source 2030:5060::9050/64
[Sysname-acl6-basic-2000] rule deny source fe80:5060::8050/96
# Verify the configuration.
[Sysname-acl6-basic-2000] display acl ipv6 2000
Basic IPv6 ACL 2000, named -none-, 2 rules,
ACL's step is 5
rule 0 permit source 2030:5060::9050/64
rule 5 deny source FE80:5060::8050/96