3Com S7906E - Switch, Руководство по настройке

Страница: 1151 / 2621

1-11
The work process of multicast protocol packets is as follows:
1) Receiver sends an IGMP membership report for multicast group G to CE 2. CE 2 creates a local (*,
225.1.1.1) state entry and sends a join message to the VPN RP (CE 1).
2) Upon receiving the join message from CE 2, the VPN instance on PE 2 creates a (*, 225.1.1.1)
state entry with the upstream interface being the MTI, and then PE 2 processes the join message.
Now, the VPN instance on PE 2 considers that the join message has been sent out the MTI.
3) PE 2 encapsulates the join message by means of Generic Routing Encapsulation (GRE), with its
BGP interface address as the multicast source address and the share-group address as the
multicast group address, to convert it into a normal, public network multicast data packet (11.1.2.1,
239.1.1.1), and then passes the packet to the public instance on PE 2 to have it forwarded to the
public network.
4) The multicast data packet (11.1.2.1, 239.1.1.1) is forwarded to the public instance on all the PE
devices along the share-MDT. Upon receiving this packet, every PE device decapsulates it to turn
it back into a join message to be sent to the VPN RP. Then, each PE device checks the join
message. If any PE device finds that the VPN RP is in the site it interfaces with, it passes the join
message to the VPN instance on it; otherwise, it discards the join message.
5) When receiving the join message, the VPN instance on PE 1 considers that it received the
message from the MTI. PE 1 creates a local (*, 225.1.1.1) state entry, with the downstream
interface being the MTI and the upstream interface being the one that leads to CE 1. At the same
time, it sends a join message to CE 1, which is the VPN RP.
6) Upon receiving the join message from the VPN instance on PE 1, CE 1 creates a local (*, 225.1.1.1)
state entry or updates the entry if it already exists. By now, the construction of an RPT across the
public network is completed.
For details about GRE, refer to GRE Configuration in the VPN Volume .
Delivery of multicast data packets
After the share-MDT is established, the private network multicast data flows to the receivers in each site
along the distribution tree. The private network multicast packets are encapsulated into normal public
network multicast packets on the local PE device, transmitted along the share-MDT, and then
decapsulated on the remote PE device and transmitted in the private network.
1) If PIM-DM or PIM-SSM is running in the VPNs network, the customer multicast traffic flows along
the SPTs across the public network.
2) On a VPNs network running PIM-SM (before RPT-to-SPT switchover only):
z
If the receivers and the VPN RP are in different sites, the customer multicast traffic flows along the
RPT across the public network.
z
If the multicast source and the VPN RP are in different sites, the customer multicast traffic flows
along the SPTs across the public network.