3Com S7906E - Switch, Руководство по настройке

Страница: 553 / 2621

1-9
FTP Client Configuration Example (Distributed IRF Device)
Network requirements
z
As shown in Figure 1-3 , Device is a IRF system, which is composed of a master and a slave. The
member ID of the master is 1, and the slot numbers of the AMB and the SMB on the master are 0
and 1 respectively. The member ID of the slave is 2, and the slot numbers of the AMB and SMB on
the slave are 0 and 1 respectively.
z
Device serves as an FTP client. PC serves as the FTP server. Their IP addresses are as shown in
the following figure. Device and PC are reachable to each other.
z
Device downloads a startup file from PC for upgrade, and uploads the configuration file to PC for
backup.
z
On PC, an FTP user account has been created for the FTP client, with the username being abc
and the password being pwd .
Figure 1-3 Network diagram for FTPing a startup file from an FTP server
Configuration procedure
If the available memory space of the device is insufficient, use the fixdisk command to clear the
memory or use the delete /unreserved file - url command to delete the files not in use and then perform
the following operations.
# Log in to the server through FTP.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1 ...
Connected to 10.1.1.1.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
230 Logged in successfully
# Set the file transfer mode to binary to transmit startup file.
[ftp] binary