3Com S7906E - Switch, Руководство по настройке

Страница: 1497 / 2621

1-18
[P-Vlan-interface20] quit
# Create a static LSP for forwarding packets from PE 1 to PE 2.
[P] static-lsp transit pe1_pe2 incoming-interface vlan-interface 10 in-label 200 next-hop
10.2.2.1 out-label 201
# Create a static LSP for forwarding packets from PE 2 to PE 1.
[P] static-lsp transit pe2_pe1 incoming-interface vlan-interface 20 in-label 101 next-hop
10.1.1.1 out-label 100
4) Configure PE 2
# Configure the LSR ID and enable MPLS globally.
<Sysname> system-view
[Sysname] sysname PE2
[PE2] interface loopback 0
[PE2-LoopBack0] ip address 10.0.0.3 32
[PE2-LoopBack0] quit
[PE2] mpls lsr-id 10.0.0.3
[PE2] mpls
[PE2-mpls] quit
# Enable MPLS L2VPN globally.
[PE2] mpls l2vpn
# Configure interface VLAN-interface 10.
[PE2] interface vlan-interface 10
[PE2-Vlan-interface10] quit
# Configure interface VLAN-interface 20 and enable MPLS.
[PE2] interface vlan-interface 20
[PE2-Vlan-interface20] ip address 10.2.2.1 24
[PE2-Vlan-interface20] mpls
[PE2-Vlan-interface20] quit
# Create a remote connection from CE 2 to CE 1, using the interface connecting CE 2 as the incoming
interface and that connecting the P device as the outgoing interface, setting the incoming label to 201
and the outgoing label to 101.
[PE2] ccc ce2-ce1 interface vlan-interface 10 in-label 201 out-label 101 next-hop 10.2.2.2
5) Configure CE 2
<Sysname> system-view
[Sysname] sysname CE2
[CE2] interface vlan-interface 10
[CE2-Vlan-interface10] ip address 100.1.1.2 24
6) Verify your configuration
After completing the above configurations, you can display CCC connection information on PE 1. There
should be one remote CCC connection established. CE 1 and CE 2 should be able to ping each other.
# Display CCC connection information on PE 1.
[PE1] display ccc
Total ccc vc : 1
Local ccc vc : 0, 0 up