3Com S7906E - Switch, Руководство по настройке

Страница: 1332 / 2621

1-4
Controlling Route Distribution and Reception
Configuration Prerequisites
Before configuring this task, you need to:
z
Enable IPv6.
z
Configure the IPv6 MBGP basic functions.
Injecting a Local IPv6 MBGP Route
Follow these steps to inject a local IPv6 MBGP route:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 MBGP address
family view
ipv6-family multicast —
Inject a network to the IPv6
MBGP routing table
network ipv6-address
prefix-length [ route-policy
route-policy-name | short-cut ]
Required
Not injected by default
Configuring IPv6 MBGP Route Redistribution
Follow these steps to configure IPv6 MBGP route redistribution:
To do… Use the command… Description
Enter system view system-view —
Enter BGP view bgp as-number —
Enter the MBGP multicast
address family view
ipv6-family multicast —
Enable default route
redistribution into the IPv6
MBGP routing table
default-route imported
Optional
By default, default route
redistribution is not allowed.
Enable route redistribution from
another routing protocol
import-route protocol
[ process-id ] [ med med-value |
route-policy
route-policy-name
] *
Required
Not enabled by default
If the default-route imported command is not configured, using the import-route command cannot
redistribute any IGP default route.