ZyXEL Communications ZyWall USG 50-H Series, User Manual

Page: 618 / 704

Appendix A Log Descriptions
ZyWALL USG 50-H User’s Guide
618
Receive an ARP
response from an
unknown client
The device received an ARP response from an unknown client.
In total, received %d
arp response packets
for the requested IP
address
The device received the specified total number of ARP response
packets for the requested IP address.
Clear arp cache
successfully.
The ARP cache was cleared successfully.
Client MAC address is
not an Ethernet
address
A client MAC address is not an Ethernet address.
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
The device received a DHCP request through the specified interface.
IP confliction is
detected. Send back
DHCP-NAK.
IP conflict was detected. Send back DHCP-NAK.
Clear ARP cache done
Clear ARP cache done.
NTP update successful,
current time is %s
The device successfully synchronized with a NTP time server .
%s is the time format.
NTP update failed
The device was not able to synchronize with the NTP time server
successfully.
Device is rebooted by
administrator!
An administrator restarted the device.
Insufficient memory.
Cannot allocate system memory.
Connect to dyndns
server has failed.
Cannot connect to members.dyndns.org to update DDNS.
Update the profile %s
has failed because of
strange server
response.
Update profile failed because the response was strange, %s is the
profile name.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update profile succeeded, because the IP address of profile is
unchanged, %s is the profile name.
Update the profile %s
has succeeded.
Update profile succeeded, %s is the profile name.
Update the profile %s
has failed because the
FQDN %s is invalid.
Update profile failed because FQDN for the profile is invalid for
DynDNS, 1st %s is the profile name, 2nd %s is the FQDN of the
profile.
Update the profile %s
has failed because the
FQDN %s is malformed.
The FQDN format is malformed for DynDNS server, 1st %s is the
profile name, 2nd %s is the FQDN of the profile.
Table 243 System Logs (continued)
LOG MESSAGE DESCRIPTION