ZyXEL Communications ZyWall USG 50-H Series User Manual Download Page 607

Page: 607 / 704

Appendix A Log Descriptions

ZyWALL USG 50-H User’s Guide

607

Bandwidth graph of

protocol %s has been

disabled.

The bandwidth graph has been turned off for the listed protocol’s
traffic.

Default port %s of

protocol %s has been

added.

The listed default port (first %s) has been added for the listed
protocol (second %s).

Default port %s of

protocol %s has been

removed.

The listed default port (first %s) has been deleted for the listed
protocol (second %s).

Rule %s:%s has been

moved to index %s.

An application patrol rule has been moved.
1st %s: Protocol name
2nd %s: From rule index number
3rd %s: To rule index number

Rule %s:%s has been

removed.

An application patrol rule has been deleted.
1st %s: Protocol name
2nd %s: From rule index number
3rd %s: To rule index number

System fatal error:

60011001.

The device failed to initiate the application patrol daemon.

System fatal error:

60011002.

The device failed to get the application patrol protocol list.

System fatal error:

60011003.

The device failed to initiate XML.

System fatal error:

60011004.

The device failed to turn application patrol off while the system was
initiating.

Table 237

IKE Logs

LOG MESSAGE

DESCRIPTION

Peer has not announced

DPD capability

The remote IPSec router has not announced its dead peer detection
(DPD) capability to this device.

[COOKIE] Invalid

cookie, no sa found

Cannot find SA according to the cookie.

[DPD] No response from

peer. Using existing

Phase-1 SA in %u

seconds. Trying with

Phase-1 rekey.

The device’s DPD feature has not detected a response from the
remote IPSec router. %u is the retry time.

[HASH] : Tunnel [%s]

Phase 1 hash mismatch

is the tunnel name. When negotiating Phase-1, the exchange hash

did not match.

[HASH] : Tunnel [%s]

Phase 2 hash mismatch"

is the tunnel name. When negotiating Phase-2, the calculated quick

mode authentication hash did not match.

[ID] : Invalid ID

information

ID payload is not valid (in Phase-1 is local/peer ID, in Phase-2 is local/
remote policy).

[ID] : Tunnel [%s]

Local IP mismatch

is the tunnel name. When negotiating Phase-1, the local tunnel IP

did not match the My IP in VPN gateway.

Table 236

Application Patrol (continued)

MESSAGE

EXPLANATION

Summary of Contents for ZyWall USG 50-H Series

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyWall USG 50-H Series

Reviews:

Related manuals for ZyWall USG 50-H Series

Brands by name

Popular brands

ZyXEL Communications ZyWall USG 50-H Series, User Manual

Search results

Summary of Contents for ZyWall USG 50-H Series

Reviews:

Related manuals for ZyWall USG 50-H Series

Brands by name

Popular brands