ZyXEL Communications ZyWall USG 50-H Series, User Manual

Page: 254 / 704

Chapter 13 DDNS
ZyWALL USG 50-H User’s Guide
254
Figure 187 Network > DDNS > Add
The following table describes the labels in this screen.
Table 95 Network > DDNS > Add
LABEL DESCRIPTION
Enable DDNS
Profile Select this check box to use this DDNS entry.
Profile Name When you are adding a DDNS entry, type a descriptive name for this DDNS entry in
the ZyWALL. You may use 1-31 alphanumeric characters, underscores(
_ ), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
This field is read-only when you are editing an entry.
DDNS Type Select the type of DDNS service you are using.
Username Type the user name used when you registered your domain name. You can use up
to 31 alphanumeric characters and the underscore. Spaces are not allowed.
For a Dynu DDNS entry, this user name is the one you use for logging into the
service, not the name recorded in your personal information in the Dynu website.
Password Type the password provided by the DDNS provider. You can use up to 64
alphanumeric characters and the underscore. Spaces are not allowed.
DDNS Settings Click Advanced to display more settings. Click Basic to display fewer settings.
Domain name Type the domain name you registered. You can use up to 255 characters.
Primary Binding
Address Use these fields to set how the ZyWALL determines the IP address that is mapped
to your domain name in the DDNS server. The ZyWALL uses the
Backup Binding
Address if the interface specified by these settings is not available.
Interface Select the interface to use for updating the IP address mapped to the domain
name. Select
Any to let the domain name be used with any interface.