ZyXEL Communications ZyWall USG 50-H Series, User Manual

Page: 164 / 704

Chapter 8 Interface
ZyWALL USG 50-H User’s Guide
164
Figure 133 Interface Wizard: WAN ISP Connection Settings (PPTP, Static IP Shown)
The following table describes the labels in this screen.
Table 48 Interface Wizard: WAN ISP Connection Settings
LABEL DESCRIPTION
ISP Parameter This section appears if the interface uses a PPPoE or PPTP Internet connection.
User Name Type the user name given to you by your ISP. You can use alphanumeric and -
_
@$./
characters, and it can be up to 31 characters long.
Password Type the password associated with the user name above. Use up to 64 ASCII
characters except the [] and ?. This field can be blank.
Retype to
Confirm
Type your password again for confirmation.
Nailed-Up Select Nailed-Up if you do not want the connection to time out.
Idle Timeout Type the time in seconds that elapses before the router automatically disconnects
from the PPPoE server. 0 means no timeout.
PPTP
Configuration This section only appears if the interface uses a PPPoE or PPTP Internet
connection.
Base
Interface This displays the identity of the Ethernet interface you configure to connect with a
modem or router.
Base IP
Address Type the (static) IP address assigned to you by your ISP.
IP Subnet
Mask Type the subnet mask assigned to you by your ISP (if given).
Server IP Type the IP address of the PPTP server.
WAN Interface
Setup
WAN
Interface This displays the identity of the interface you configure to connect with your ISP.