ZyXEL Communications ZyWall USG 50-H Series, User Manual

Page: 615 / 704

Appendix A Log Descriptions
ZyWALL USG 50-H User’s Guide
615
FTP port has been
changed to default
port.
An administrator changed the port number for FTP back to the default
(21).
SNMP port has been
changed to port %s.
An administrator changed the port number for SNMP.
%s is port number assigned by user
SNMP port has been
changed to default
port.
An administrator changed the port number for SNMP back to the
default (161).
Console baud has been
changed to %s.
An administrator changed the console port baud rate.
%s is baud rate assigned by user
Console baud has been
reset to %d.
An administrator changed the console port baud rate back to the
default (115200).
%d is default baud rate
DHCP's DNS option:%s
has changed.
DHCP pool's DNS option support from WAN interface. If this interface
is unlink/disconnect or link/connect, this log will be shown.
%s is interface name. The DNS option of DHCP pool has retrieved
from it
Set timezone to %s.
An administrator changed the time zone.
%s is time zone value
Set timezone to
default.
An administrator changed the time zone back to the default (0).
Enable daylight
saving.
An administrator turned on daylight saving.
Disable daylight
saving.
An administrator turned off daylight saving.
DNS access control
rules have been
reached the maximum
number.
An administrator tried to add more than the maximum number of DNS
access control rules (64).
DNS access control
rule %u of DNS has
been appended.
An administrator added a new rule.
%u is rule number
DNS access control
rule %u has been
inserted.
An administrator inserted a new rule.
%u is rule number
DNS access control
rule %u has been
appended
An administrator appended a new rule.
%u is rule number
DNS access control
rule %u has been
modified
An administrator modified the rule %u.
%u is rule number
DNS access control
rule %u has been
deleted.
An administrator removed the rule %u.
%u is rule number
DNS access control
rule %u has been moved
to %d.
An administrator moved the rule %u to index %d.
%u is previous index
%d variable is current index
Table 242 Built-in Services Logs (continued)
LOG MESSAGE DESCRIPTION