manualshive.com logo in svg

ZyXEL Communications ZyWall USG 50-H Series, User Manual

The ZyXEL Communications ZyWall USG 50-H Series is a high-performance firewall appliance designed to provide robust network security for small businesses. For comprehensive setup and configuration guidance, be sure to download the User Manual for free from our website. Get all the information you need to maximize the capabilities of your device.

Share
Download
background image

Chapter 8 Interface

ZyWALL USG 50-H User’s Guide

182

Subnet Mask

Enter the subnet mask of this interface in dot decimal notation. The subnet 
mask indicates what part of the IP address is the same for all computers in the 
network.

Metric

Enter the priority of the gateway (if any) on this interface. The ZyWALL decides 
which gateway to use based on this priority. The lower the number, the higher 
the priority. If two or more gateways have the same priority, the ZyWALL uses 
the one that was configured first.

Gateway Settings

My Address

Specify the IP address to use as the source address for the packets this 
interface tunnels to the remote gateway. The remote gateway sends traffic to 
this interface or IP address. 

Remote 
Gateway 
Address

Enter the IP address or domain name of the remote gateway to which this 
interface tunnels traffic.

Interface 
Parameters

Egress 
Bandwidth

Enter the maximum amount of traffic, in kilobits per second, the ZyWALL can 
send through the interface to the network. Allowed values are 0 - 1048576. This 
setting is used in WAN load balancing and bandwidth management.

Ingress 
Bandwidth

This is reserved for future use.
Enter the maximum amount of traffic, in kilobits per second, the ZyWALL can 
receive from the network through the interface. Allowed values are 0 - 1048576.

MTU

Maximum Transmission Unit. Type the maximum size of each data packet, in 
bytes, that can move through this interface. If a larger packet arrives, the 
ZyWALL divides it into smaller fragments. Allowed values are 576 - 1500. 
Usually, this value is 1500.

Connectivity Check

The interface can regularly check the connection to the gateway you specified 
to make sure it is still available. You specify how often the interface checks the 
connection, how long to wait for a response before the attempt is a failure, and 
how many consecutive failures are required before the ZyWALL stops routing to 
the gateway. The ZyWALL resumes routing to the gateway the first time the 
gateway passes the connectivity check.

Enable 
Connectivity 
Check

Select this to turn on the connection check.

Check Method

Select the method that the gateway allows. 
Select 

icmp

 to have the ZyWALL regularly ping the gateway you specify to 

make sure it is still available. 
Select 

tcp

 to have the ZyWALL regularly perform a TCP handshake with the 

gateway you specify to make sure it is still available. 

Check Period

Enter the number of seconds between connection check attempts.

Check Timeout

Enter the number of seconds to wait for a response before the attempt is a 
failure.

Check Fail 
Tolerance

Enter the number of consecutive failures before the ZyWALL stops routing 
through the gateway.

Check Default 
Gateway

Select this to use the default gateway for the connectivity check.

Check this 
address

Select this to specify a domain name or IP address for the connectivity check. 
Enter that domain name or IP address in the field next to it.

Check Port

This field only displays when you set the 

Check Method

 to 

tcp

. Specify the port 

number to use for a TCP connectivity check.

Table 57   

Network > Interface > Tunnel > Edit (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyWall USG 50-H Series

































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZyWall USG 50-H Series

Nomadix NWCG User Manual preview
NWCG
Brand: Nomadix Pages: 204
NetComm NB600W Quick Start Manual preview
NB600W
Brand: NetComm Pages: 2
NETGEAR C6300BD Installation Manual preview
C6300BD
Brand: NETGEAR Pages: 6
Zte ZXHN F680 User Manual preview
ZXHN F680
Brand: Zte Pages: 14
Nortel MCC 3100 User Manual preview
MCC 3100
Brand: Nortel Pages: 134
Nortel Remote Office 9150 Installation And Administration Manual preview
Remote Office 9150
Brand: Nortel Pages: 570
Mi-Light MiBoxer ZB-Box2 Manual preview
MiBoxer ZB-Box2
Brand: Mi-Light Pages: 6
Innoband 6000-B1 User Manual preview
6000-B1
Brand: Innoband Pages: 87
Internode TG-789 Quick Setup Manual preview
TG-789
Brand: Internode Pages: 12
ZyXEL Communications 65-100-060607B Specification Sheet preview
65-100-060607B
Brand: ZyXEL Communications Pages: 2
Lucent Technologies VPN Firewall Brick 20 Hardware Manual preview
VPN Firewall Brick 20
Brand: Lucent Technologies Pages: 52
IBM High Rate Wireless LAN Gateway Quick Start Manual preview
High Rate Wireless LAN Gateway
Brand: IBM Pages: 44
ActionTec AUPX900 User Manual preview
AUPX900
Brand: ActionTec Pages: 66
ACT'L eWON4002 Installation Manual preview
eWON4002
Brand: ACT'L Pages: 38
CommScope Touchstone DG6450 User Manual preview
Touchstone DG6450
Brand: CommScope Pages: 36
IFM Electronic CR3146 Operating Instructions Manual preview
CR3146
Brand: IFM Electronic Pages: 22
Avaya G700 Installing And Upgrading preview
G700
Brand: Avaya Pages: 808
WAGO BACnet/IP Installation And Service Instructions Manual preview
BACnet/IP
Brand: WAGO Pages: 32

Brands by name

Popular brands

Load more brands