manualshive.com logo in svg

ZyXEL Communications ZyWall USG 50-H Series, User Manual

Share
Download
ZyXEL Communications ZyWall USG 50-H Series User Manual Download Page 609

 Appendix A Log Descriptions

ZyWALL USG 50-H User’s Guide

609

[SA] : Tunnel [%s] 

Phase 2 pfs 

unsupported: %d

%s is the tunnel name. When negotiating Phase-2, this device does 
not support the PFS specified.

[SA] : Tunnel [%s] 

Phase 2 SA 

encapsulation 

mismatch

%s is the tunnel name. When negotiating Phase-2, the SA 
encapsulation did not match.

[SA] : Tunnel [%s] 

Phase 2 SA protocol 

mismatch

%s is the tunnel name. When negotiating Phase-2, the SA protocol did 
not match.

[SA] : Tunnel [%s] SA 

sequence size mismatch

%s is the tunnel name. When negotiating Phase-2, the SA sequence 
size did not match.

[XCHG] exchange type 

is not IP, AGGR, or 

INFO

This device is the responder and this is the initiator’s first packet, but 
exchange type is not IP, AGGR, or INFO and the packet is ignored.

Cannot resolve My IP 

Addr %s for Tunnel 

[%s]

1st %s is my ip address. 2nd %s is the tunnel name. When selecting a 
matched proposal in phase-1, the engine could not get My-IP address.

Cannot resolve Secure 

Gateway Addr %s for 

Tunnel [%s]

1st %s is my ip address. 2nd %s is the tunnel name; When selecting a 
matched proposal in phase-1, the engine could not get the correct 
secure gateway address.

Could not dial dynamic 

tunnel "%s"

%s is the tunnel name. The tunnel is a dynamic tunnel and the device 
cannot dial it.

Could not dial 

incomplete tunnel "%s"

%s is the tunnel name. The tunnel setting is not complete.

Could not dial manual 

key tunnel "%s"

%s is the tunnel name. The manual key tunnel cannot be dialed.

DPD response with 

invalid ID

When receiving a DPD response with invalid ID ignored.

DPD response with no 

active request

When receiving a DPD response with no active query.

IKE Packet Retransmit

When retransmitting the IKE packets.

Phase 1 IKE SA process 

done

When Phase 1 negotiation is complete.

Recv Main Mode request 

from [%s]

%s is the remote name; When receiving a request to enter Main mode.

Recv Aggressive Mode 

request from [%s]

%s is the remote name; When receiving a request to enter Aggressive 
mode.

Recv:[SA][KE][ID][CER

T][CR][HASH][SIG][NON

CE][DEL][VID][ATTR][N

OTFY:%s]

This is a combined message for incoming IKE packets 

Send Main Mode request 

to [%s]

%s is the remote name. The device sent a request to enter Main Mode.

Send Aggressive Mode 

request to [%s]

%s is the remote name. The device sent a request to enter Aggressive 
Mode.

Table 237   

IKE Logs (continued)

LOG MESSAGE

DESCRIPTION

Summary of Contents for ZyWall USG 50-H Series

































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands