ZyXEL Communications ZyWall USG 50-H Series, User Manual

Page: 453 / 704

Chapter 28 User/Group
ZyWALL USG 50-H User’s Guide
453
28.4.1 Default User Authentication Timeout Settings Edit Screens
The Default Authentication Timeout Settings Edit screen allows you to set the default
authentication timeout settings for the selected type of user account. These default
authentication timeout settings also control the settings for any existing user accounts that are
set to use the default settings. You can still manually configure any user account’s
authentication timeout settings.
To access this screen, go to the Object > User/Group > Setting screen (see Section 28.4 on
page 449 ), and click one of the Default Authentication Timeout Settings section’s Edit
icons.
Figure 369 Object > User/Group > Setting > Default Authentication Timeout Settings Edit
The following table describes the labels in this screen.
Table 161 Object > User/Group > Setting > Default Authentication Timeout Settings Edit
LABEL DESCRIPTION
User Type This read-only field identifies the type of user account for which you are configuring
the default settings.
•
Admin - this user can look at and change the configuration of the ZyWALL
• Limited-Admin - this user can look at the configuration of the ZyWALL but not
to change it
• User - this user has access to the ZyWALL’s services but cannot look at the
configuration
• Guest - this user has access to the ZyWALL’s services but cannot look at the
configuration
• Ext-User - this user account is maintained in a remote server, such as RADIUS
or LDAP. See Ext-User Accounts on page 444 for more information about this
type.
Lease Time Enter the number of minutes this type of user account has to renew the current
session before the user is logged out. You can specify 1 to 1440 minutes. You can
enter 0 to make the number of minutes unlimited.
Admin users renew the session every time the main screen refreshes in the web
configurator. Access users can renew the session by clicking the
Renew button on
their screen. If you allow access users to renew time automatically (see Section
28.4 on page 449 ), the users can select this check box on their screen as well. In
this case, the session is automatically renewed before the lease time expires.
Reauthentication
Time Type the number of minutes this type of user account can be logged into the
ZyWALL in one session before the user has to log in again. You can specify 1 to
1440 minutes. You can enter 0 to make the number of minutes unlimited. Unlike
Lease Time , the user has no opportunity to renew the session without logging out.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.