ZyXEL Communications ZyWall USG 50-H Series, User Manual

Page: 628 / 704

Appendix A Log Descriptions
ZyWALL USG 50-H User’s Guide
628
27
Path was not verified.
28
Maximum path length reached.
Table 248 Interface Logs
LOG MESSAGE DESCRIPTION
Interface %s has been
deleted.
An administrator deleted an interface. %s is the interface name.
Create interface %s
has been failed.
When PPP can't running fail,
%s
: interface name.
Base interface %s is
disabled. Interface %s
is disabled now.
When user disable ethernet, vlan or bridge interface and this interface
is base interface of PPP or virtual interface. PPP and virtual will disable
too. 1st %s is interface name, 2nd %s is interface.
Interface %s has been
changed.
An administrator changed an interface’s configuration.
%s
: interface
name.
Interface %s has been
added.
An administrator added a new interface.
%s
: interface name.
Interface %s is
enabled.
An administrator enabled an interface. %s: interface name.
Interface %s is
disabled.
An administrator disabled an interface. %s: interface name.
%s MTU > (%s MTU - 8),
%s may not work
correctly.
An administrator configured a PPP interface, PPP interface MTU >
(base interface MTU - 8), PPP interface may not run correctly because
PPP packets will be fragmented by base interface and the peer will not
receive correct PPP packets. 1st %s: PPP interface name, 2nd %s:
ethernet interface name.
(%s MTU - 8) < %s MTU,
%s may not work
correctly.
An administrator configured ethernet, vlan or bridge and this interface
is base interface of PPP interface. PPP interface MTU > (base
interface MTU - 8), PPP interface may not run correctly because PPP
packets will be fragmented by base interface and peer will not receive
correct PPP packets.1st %s: Ethernet interface name, 2nd %s: PPP
interface name.
Interface %s links
down. Default route
will not apply until
interface %s links up.
An administrator set a static gateway in interface but this interface is
link down. At this time the configuration will be saved but route will not
take effect until the link becomes up.1st %s: interface name, 2nd %s:
interface name.
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u,UpTime=%s
Port statistics log. This log will be sent to the VRPT server.
1st %s: physical port name, 2nd %s: physical port status, 1st %u:
physical port Tx packets, 2nd %u: physical port Rx packets, 3rd %u:
physical port packets collisions, 4th %u: physical port Tx Bytes/s, 5th
%u: physical port Rx Bytes/s, 3rd %s: physical port up time.
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u
Interface statistics log. This log will be sent to the VRPT server.
1st %s: interface name, 2nd %s: interface status, 1st %u variable:
interface Tx packets, 2nd %u variable: interface Rx packets, 3rd %u:
interface packets collisions, 4th %u: interface Tx Bytes/s, 5th %u:
interface Rx Bytes/s.
Interface %s start
dailing.
A PPP interface started dialing to a server. %s: interface name.
CODE DESCRIPTION