manualshive.com logo in svg

ZyXEL Communications ZyWall USG 50-H Series, User Manual

Share
Download
ZyXEL Communications ZyWall USG 50-H Series User Manual Download Page 282

Chapter 17 IP/MAC Binding

ZyWALL USG 50-H User’s Guide

282

17.1.2  What You Need to Know About IP/MAC Binding

DHCP

IP/MAC address bindings are based on the ZyWALL’s dynamic and static DHCP entries.

Interfaces Used With IP/MAC Binding

IP/MAC address bindings are grouped by interface. You can use IP/MAC binding with 
Ethernet, bridge, and VLAN interfaces. You can also enable or disable IP/MAC binding and 
logging in an interface’s configuration screen.

17.2  IP/MAC Binding Summary

Click 

Network > IP/MAC Binding

 to open the 

IP/MAC Binding Summary 

screen. This 

screen lists the total number of IP to MAC address bindings for devices connected to each 
supported interface. 

Figure 216   

Network > IP/MAC Binding > Summary 

The following table describes the labels in this screen.  

17.2.1  IP/MAC Binding Edit

Click 

Network > IP/MAC Binding > Edit

 to open the 

IP/MAC Binding Edit 

screen. Use 

this screen to configure an interface’s IP to MAC address binding settings. 

Table 102   

Network > IP/MAC Binding > Summary 

LABEL

DESCRIPTION

#

This is the index number of the interface.

Interface

This is the name of an interface that supports IP/MAC binding.

Number of 
Binding

This field displays the interface’s total number of IP/MAC bindings and IP addresses 
that the interface has assigned by DHCP. 

Modify

The 

Active

 icon displays whether or not IP/MAC binding is enabled for an interface. 

Click it to activate or deactivate IP/MAC binding on an interface. Make sure you 
click 

Apply

 to save and apply the change. 

Click the 

Edit

 icon to go to the screen where you can edit an interface’s IP/MAC 

binding settings.

Apply

Click 

Apply

 to

 

save your changes back to the ZyWALL.

Summary of Contents for ZyWall USG 50-H Series

































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands