ZyXEL Communications VMG8825-B Series User Manual Download Page 32

Page: 32 / 360

Chapter 2 The Web Configurator

VMG8825-B Series User’s Guide

SIP

SIP Account

Use this screen to set up information about your SIP account and
configure audio settings such as volume levels for the phones
connected to the VMG.

SIP Service
Provider

Use this screen to configure the SIP server information, QoS for VoIP calls,
the numbers for certain phone functions, and dialing plan.

Phone

Phone Device

Use this screen to view detailed information of the phone devices.

Region

Use this screen to select your location and a call service mode.

Call Rule

Speed Dial

Use this screen to configure speed dial for SIP phone numbers that you
call often.

Call History

Use this screen to view a call history list.

Call Summary

Use this screen to view the summary of received, dialed and missed calls.

System Monitor

Log

System Log

Use this screen to view the status of events that occurred to the VMG.
You can export or e-mail the logs.

Security Log

Use this screen to view all security related events. You can select level
and category of the security events in their proper drop-down list
window.

Levels include:

• Emergency
• Alert
• Critical
• Error
• Warning
• Notice
• Informational
• Debugging

Categories include:

• Account
• Attack
• Firewall
• MAC Filter

Traffic Status

WAN

Use this screen to view the status of all network traffic going through the
WAN port of the VMG.

LAN

Use this screen to view the status of all network traffic going through the
LAN ports of the VMG.

NAT

Use this screen to view NAT statistics for connected hosts.

VoIP Status

Use this screen to view VoIP registration, current call status and phone
numbers for the phone ports.

ARP table

Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection.

Routing Table

Use this screen to view the routing table on the VMG.

Multicast Status

IGMP Status

Use this screen to view the status of all IGMP settings on the VMG.

MLD Status

Use this screen to view the status of all MLD settings on the VMG.

xDSL Statistics

Use this screen to view the VMG’s xDSL traffic statistics.

Cellular

Statistics

Cellular Statistics

Use this screen to look at cellular Internet connection status.

Maintenance

Table 5 Navigation Panel Summary (continued)

LINK

TAB

FUNCTION

Summary of Contents for VMG8825-B Series









































































































































































































































































































































































Search results

Summary of Contents for VMG8825-B Series

Reviews:

ZyXEL Communications VMG8825-B Series, User Manual, Page: 32 / 360

Search results

Summary of Contents for VMG8825-B Series

Reviews: