manualshive.com logo in svg

ZyXEL Communications VMG8825-B Series, User Manual, Page: 272 / 360

Share
Download
ZyXEL Communications VMG8825-B Series User Manual Download Page 272

Chapter 29 Multicast Status

VMG8825-B Series User’s Guide

272

Figure 162   

System Monitor > Multicast Status > MLD Status

The following table describes the labels in this screen.

Table 128   System Monitor > Multicast Status > MLD Status

LABEL

DESCRIPTION

Refresh

Click this button to update the status on this screen.

Interface

This field displays the name of an interface on the VMG that belongs to an MLD multicast group. 

Multicast Group

This field displays the name of the MLD multicast group to which the interface belongs. 

Filter Mode 

INCLUDE

 means that only the IP addresses in the 

Source List 

get to receive the multicast group’s 

traffic.

EXCLUDE

 means that the IP addresses in the 

Source List 

are not allowed to receive the multicast 

group’s traffic but other IP addresses can.

Source List

This is the list of IP addresses that are allowed or not allowed to receive the multicast group’s 
traffic depending on the filter mode.

Member

This is the list of members in the multicast group.

Summary of Contents for VMG8825-B Series









































































































































































































































































































































































Reviews:

No comments