manualshive.com logo in svg

ZyXEL Communications VMG8825-B Series, User Manual, Page: 226 / 360

Share
Download
ZyXEL Communications VMG8825-B Series User Manual Download Page 226

Chapter 22 Certificates

VMG8825-B Series User’s Guide

226

Figure 136   

Trusted CA: View 

The following table describes the fields in this screen. 

22.4.2  Import Trusted CA Certificate

Click the 

Import Certificate

 button in the 

Trusted CA

 screen to open the following screen. The VMG trusts 

any valid certificate signed by any of the imported trusted CA certificates.

Table 100   Trusted CA: View

LABEL

DESCRIPTION

Name

This field displays the identifying name of this certificate. 

This read-only text box displays the certificate in Privacy Enhanced Mail (PEM) format. PEM uses 
base 64 to convert the binary certificate into a printable form. 

You can copy and paste the certificate into an e-mail to send to friends or colleagues or you 
can copy and paste the certificate into a text editor and save the file on a management 
computer for later distribution (via floppy disk for example).

Back

Click 

Back

 to return to the previous screen.

Summary of Contents for VMG8825-B Series









































































































































































































































































































































































Reviews:

No comments