Chapter 35 Remote Management
VMG8825-B Series User’s Guide
284
35.3 The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the VMG through the
services configured in the
Maintenance > Remote Management
screen. Click
Maintenance > Remote
Management > Turst Domain
to open the following screen.
Note: If this list is empty, all public IP addresses can access the VMG from the WAN through
the specified services.
Figure 170
Maintenance > Remote Management > Trust Domain
The following table describes the fields on this screen.
35.4 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the VMG. Click the
Add Trust
Domain
button in the
Maintenance > Remote Management > Turst Domain
screen to open the following
screen.
Trust Domain
Select the
Enable
check box for the corresponding services that you want to allow access to the
VMG from the trusted hosts configured in the
Maintenance > Remote MGMT > Trust Domain
screen.
If you only want certain WAN connections to have access to the VMG using the corresponding
services, then clear
WAN
, select
Trust Domain
and configure the allowed IP address(es) in the
Trust Domain
screen.
Port
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Apply
Click
Apply
to save your changes back to the VMG.
Cancel
Click
Cancel
to restore your previously saved settings.
Table 135 Maintenance > Remote Management > MGMT Services (continued)
LABEL
DESCRIPTION
Table 136 Maintenance > Remote Management > Trust Domain
LABEL
DESCRIPTION
Add Trust
Domain
Click this to add a trusted host IP address.
IP Address
This field shows a trusted host IP address.
Delete
Click the
Delete
icon to remove the trust IP address.