ZyXEL Communications VMG8825-B Series, User Manual, Page: 110 / 360

Share

Page: 110 / 360

ZyXEL Communications VMG8825-B Series User Manual Download Page 110

Chapter 7 Wireless

VMG8825-B Series User’s Guide

110

• One Connect will be enabled and grayed out automatically. It’s used for the communication

between the VMG and a Multy-Pro-supported extenders for the setup of a MESH network.

• The SSID and WiFi password of the main 2.4GHz wireless network will be copied to the main 5GHz

wireless network.

See the steps below on how to set up a MESH network with the VMG. The setup could take you 30
minutes.

Configurations on a Multy-Pro-Supported Extender(s)

1

Prepare a Multy-Pro-supported extender(s) from Zyxel.
The following table lists the Multy-Pro-supported extenders from Zyxel at the time of writing.

2

If the Multy-Pro-supported extender is in repeater mode, enable the wireless LAN. See your Multy-Pro-
supported extender’s UG for how to enable the wireless LAN.

3

If the Multy-Pro-supported extender is in AP mode, connect it to the VMG using an Ethernet cable.

4

Turn on the Multy-Pro-supported extender.

5

Enable Zyxel MESH in the Web Configurator. See your Multy-Pro-supported extender’s UG for how to
enable Zyxel MESH.

Configurations on the VMG

1

If the Multy-Pro-supported extender is in repeater mode, enable the wireless LAN.

2

Enable Zyxel MESH in the

Network > Wireless > MESH

screen.

3

Press the

WPS

button for more than five seconds on the VMG.

Or
Click

Add Extender

in the Multy Pro App. Install from Google Play or the Apple App store.

The following figure shows the Multy Pro application. Device

Z

is the VMG. Device

A

is a Multy-Pro-

supported extender in AP mode. Devices

B

and

C

are Multy-Pro-supported extenders in repeater Mode.

Table 26 Multy-Pro-Supported Extenders from Zyxel

MODELS

WAP6804

WAP6906

WAP7205

«
...
108
109
110
111
112
...
»

Summary of Contents for VMG8825-B Series









































































































































































































































































































































































Reviews:

No comments