manualshive.com logo in svg

ZyXEL Communications VMG8825-B Series, User Manual, Page: 193 / 360

Share
Download
ZyXEL Communications VMG8825-B Series User Manual Download Page 193

 Chapter 15 Interface Grouping

VMG8825-B Series User’s Guide

193

Figure 106   

Interface Grouping Application

Click 

Network Setting > Interface Grouping

 to open the following screen. 

Figure 107   

Network Setting > Interface Grouping 

The following table describes the fields in this screen. 

15.2.1  Interface Group Configuration

Click the 

Add New Interface Group

 button in the

 Interface Grouping

 screen to open the following 

screen. Use this screen to create a new interface group. 

Note: An interface can belong to only one group at a time.

Table 76   Network Setting > Interface Grouping

LABEL

DESCRIPTION

Add New 
Interface Group

Click this button to create a new interface group.

Group Name

This shows the descriptive name of the group.

WAN Interface

This shows the WAN interfaces in the group.

LAN Interfaces

This shows the LAN interfaces in the group.

Criteria

This shows the filtering criteria for the group.

Modify

Click the Edit icon to configure the group.

Click the 

Delete 

icon to remove the group.

DSL

Summary of Contents for VMG8825-B Series









































































































































































































































































































































































Reviews:

No comments