manualshive.com logo in svg

ZyXEL Communications VMG8825-B Series, User Manual, Page: 296 / 360

Share
Download
ZyXEL Communications VMG8825-B Series User Manual Download Page 296

Chapter 40 Firmware Upgrade

VMG8825-B Series User’s Guide

296

The following table describes the labels on this screen. After you see the firmware updating screen, wait 
two minutes before logging into the VMG again. 

Figure 180   

Firmware Uploading

The VMG automatically restarts in this time causing a temporary network disconnect. In some operating 
systems, you may see the following icon on your desktop.

Figure 181   

Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the 

Status

 screen.

If the upload was not successful, the following screen will appear. Click 

OK

 to go back to the 

Firmware

 

Upgrade

 screen.

Table 143   Maintenance > Firmware Upgrade

LABEL

DESCRIPTION

Upgrade Firmware

Restore Default 
Settings After 
Firmware 
Upgrade

Click the check box to have the VMG automatically reset itself after the new firmware is 
uploaded.

Current 

Firmware 

Version

This is the present Firmware version and the date created. 

File Path

Type in the location of the file you wasnt to upload in this field or click 

Choose File

 to find it.

Choose File 

Click this to find the .bin file you want to upload. Remember that you must decompress 
compressed (.zip) files before you can upload them. 

Upload 

Click this to begin the upload process. This process may take up to two minutes.

Upgrade WWAN Package

Current 

WWAN 

Package 

Version

This is the present WWAN Package version and the date created. 

File Path

Type in the location of the file you want to upload in this field or click 

Choose File

 to find it.

Choose File 

Click this to find the .bin file you want to upload. Remember that you must decompress 
compressed (.zip) files before you can upload them. 

Upload 

Click this to begin the upload process. This process may take up to two minutes.

Summary of Contents for VMG8825-B Series









































































































































































































































































































































































Reviews:

No comments