Chapter 15 Interface Grouping
VMG8825-B Series User’s Guide
194
Figure 108
Interface Group Configuration
The following table describes the fields in this screen.
Table 77 Interface Group Configuration
LABEL
DESCRIPTION
Group Name
Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
WAN Interfaces
used in the
grouping
Select the WAN interface this group uses. The group can have up to one PTM interface, up to
one ATM interface, up to one ETH interface, and and up to one WWAN interface.
Select
None
to not add a WAN interface to this group.
Selected LAN
Interfaces
Available LAN
Interfaces
Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) in the
Available LAN
Interfaces
list and use the left arrow to move them to the
Selected LAN Interfaces
list to add the
interfaces to this group.
To remove a LAN or wireless LAN interface from the
Selected LAN Interfaces
, use the right-facing
arrow.
Automatically
Add Clients With
the following
DHCP Vendor
IDs
Click
Add
to identify LAN hosts to add to the interface group by criteria such as the type of the
hardware or firmware. See
for more information.
#
This shows the index number of the rule.