Chapter 15 Interface Grouping
VMG8825-B Series User’s Guide
195
15.2.2 Interface Grouping Criteria
Click the
Add
button in the
Interface Grouping Configuration
screen to open the following screen.
Figure 109
Interface Grouping Criteria
The following table describes the fields in this screen.
Filter Criteria
This shows the filtering criteria. The LAN interface on which the matched traffic is received will
belong to this group automatically.
WildCard
Support
This shows if wildcard on DHCP option 60 is enabled.
Modify
Click the
Edit
icon to change the group setting
Click the
Delete
icon to delete this group from the VMG.
OK
Click
OK
to save your changes back to the VMG.
Cancel
Click
Cancel
to exit this screen without saving.
Table 77 Interface Group Configuration (continued)
LABEL
DESCRIPTION
Table 78 Interface Grouping Criteria
LABEL
DESCRIPTION
Source MAC
Address
Enter the source MAC address of the packet.
DHCP Option 60 Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic, such
as the type of the hardware or firmware.
Enable
wildcard
Select this option to be able to use wildcards in the Vendor Class Identifier configured for DHCP
option 60.
DHCP Option 61 Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN connection
index number.
DHCP Option
125
Select this and enter vendor specific information of the matched traffic.
Enterprise
Number
Enter the vendor’s 32-bit enterprise number registered with the IANA (Internet Assigned Numbers
Authority).