ZyXEL Communications Prestige 653HWI series User Manual Download Page 239

Page: 239 / 564

Prestige 653 HWI User’s Guide

Logs Screens

20-5

Table 20-2 View Logs

LABEL DESCRIPTION

Message

This field states the reason for the log.

Source

This field lists the source IP address and the port number of the incoming packet.

Destination

This field lists the destination IP address and the port number of the incoming packet.

Notes

This field displays additional information about the log entry.

Back

Click

Back

to return to the previous screen

Email Log Now

Click

Email Log Now

to send the log screen to the e-mail address specified in the

Log

Settings

page (make sure that you have first filled in the

Address Info

fields in

Log

Settings

, see

section 20.2

Refresh

Click

Refresh

to renew the log screen.

Clear Log

Click

Clear Log

to delete all the logs.

20.4 SMTP Error Messages

If there are difficulties in sending e-mail the following error messages appear. Please see the

Support Notes

on the included disk for information on other types of error messages.

E-mail error messages appear in SMT menu 24.3.1 as "SMTP action request failed. ret= ??". The “??"are
described in the following table.

Table 20-3 SMTP Error Messages

-1 means Prestige out of socket

-2 means tcp SYN fail

-3 means smtp server OK fail

-4 means HELO fail

-5 means MAIL FROM fail

-6 means RCPT TO fail

-7 means DATA fail

-8 means mail data send fail

Summary of Contents for Prestige 653HWI series





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prestige 653HWI series

Reviews:

Related manuals for Prestige 653HWI series

Brands by name

Popular brands

ZyXEL Communications Prestige 653HWI series, User Manual

Search results

Summary of Contents for Prestige 653HWI series

Reviews:

Related manuals for Prestige 653HWI series

Brands by name

Popular brands