ZyXEL Communications Prestige 653HWI series, User Manual

Page: 305 / 564

Prestige 653HWI Series User’s Guide
Menu 2 WAN Backup Setup 25-13
The Prestige’s dial back-up feature uses PPP. To edit the remote node PPP Options, move the cursor to the
Edit PPP Options field in Menu 11.1 - Remote Node Profile (Backup ISP) , and use the space bar to
select [Yes]. Press [Enter] to open menu 11.2 as shown next.
Figure 25-9 Menu 11.2 Remote Node PPP Options
This table describes the Remote Node PPP Options Menu, and contains instructions on how to configure
the PPP options fields.
Table 25-6 Menu 11.2 Remote Node PPP Options
FIELD DESCRIPTION EXAMPLE
Encapsulation Press [SPACE BAR] and then [ENTER] to select CISCO PPP if
your Dial Backup WAN device uses Cisco PPP encapsulation,
otherwise select
Standard PPP .
Standard PPP
(default)
Compression Press [SPACE BAR] and then [ENTER] to select Yes to enable
or No to disable Stac compression.
No
(default)
BACP Your Prestige negotiates the Secondary Phone number for a
dial-up line from the peer when BACP (Bandwidth Allocation
Control Protocol) is enabled; otherwise it uses the Secondary
Phone number set in Menu 11.1. Enable
(default)
Multiple Link Options:
BOD
Calculation Select the direction of the traffic you wish to use in determining
when to add or subtract a link. Options for this field are:
Transmit or Receive , Transmit , Receive .
Transmit or
Receive
(default )
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
BACP= Enable
Multiple Link Options:
BOD Calculation= Transmit or Receive
Base Trans Rate(Kbps)= 64
Max Trans Rate(Kbps)= 128
Target Utility(Kbps)= 32-48
Press Space Bar to Toggle.