ZyXEL Communications Prestige 653HWI series, User Manual

Page: 297 / 564

Prestige 653HWI Series User’s Guide
Menu 2 WAN Backup Setup 25-5
The following table describes the fields in this menu.
Table 25-3 Menu 2 ISDN Dial Backup Setup
FIELD DESCRIPTION
Active Press [SPACE BAR] and select Yes (to enable) or No (to disable) dial-backup. The
default is No .
Switch Type This read only field displays your switch type, DSS-1.
In general, this will be Switch/Switch (default). If you are only using one B channel
(e.g., your router is sharing the ISDN BRI line with another device), then select
Switch/Unused . If your second B channel is a leased line, select Switch/Leased.
Press [SPACE BAR] to toggle through all the options. The options are below.
B Channel
Usage
Switch/Unused
Switch/Switch
Switch/Leased
Leased/Switch
Leased/Unused
Unused/Leased
Leased/Leased
Telephone
Number(s)
IDSN Data
Enter the telephone number(s) assigned to your ISDN line by your telephone
company. Some switch types only have one telephone number. Note that the router
only accepts digits; please do not include ‘–’ or spaces in this field. This field should be
no longer than 25 digits.
Edit Advanced
Setup Advanced Setup features are configured when you select Yes to enter Menu 2.1-ISDN
Advanced Setup (see ahead). Refer to section 25.5 for Advanced setup information.
Edit NetCAPI
Setup
NetCAPI Setup features are configured when you select Yes to enter Menu 2.1-ISDN
NetCAPI Setup (see ahead). Refer to section 25.6 for NetCAPI setup information.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.
25.5 ISDN Advanced Setup Menus
Select Yes in the Edit Advanced Setup field of Menu 2 – Menu 2 WAN Backup Setup to display Menu
2.2.1 as shown later.
Switch Type
The only switch available with your Prestige is DSS-1.