ZyXEL Communications Prestige 653HWI series, User Manual

Page: 71 / 564

Prestige 653HWI Series User’s Guide
LAN Setup 5-5
Table 5-1 LAN
LABEL DESCRIPTION
DHCP
DHCP
If set to Server , your Prestige can assign IP addresses, an IP default gateway and
DNS servers to Windows 95, Windows NT and other systems that support the DHCP
client.
If set to
None , the DHCP server will be disabled.
If set to Relay , the Prestige acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients. Enter the IP
address of the actual, remote DHCP server in the Remote DHCP Server field in this
case.
When DHCP is used, the following items need to be set:
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP
Pool
This field specifies the size or count of the IP address pool.
Primary DNS
Server Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP
clients along with the IP address and the subnet mask.
Secondary DNS
Server
As above.
Remote DHCP
Server If Relay is selected in the DHCP field above then enter the IP address of the actual
remote DHCP server here.
TCP/IP
IP Address
Enter the IP address of your Prestige in dotted decimal notation, for example,
192.168.1.1 (factory default).
IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
RIP Direction Select the RIP direction from None , Both , In Only and Out Only .
RIP Version
Select the RIP version from RIP-1 , RIP-2B and RIP-2M .
Multicast
IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish
membership in a multicast group. The Prestige supports both IGMP version 1 (
IGMP-
v1 ) and IGMP-v2 . Select None to disable it.