ZyXEL Communications Prestige 653HWI series, User Manual

Page: 307 / 564

Prestige 653HWI Series User’s Guide
Menu 2 WAN Backup Setup 25-15
Table 25-7 Menu 11.2 Remote Node PPP Options
FIELD DESCRIPTION EXAMPLE
IP Address
Assignment Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
node is using a dynamically assigned IP address or Static if it is using a
static (fixed) IP address. You will only be able to configure this in the
ISP node (also the one you configure in menu 4),all other nodes are set
to
Static .
Dynamic
Rem IP Addr This is the IP address you entered in the previous menu.
Rem Subnet
Mask Type the subnet mask assigned to the remote node. 255.255.255.0
My WAN
Addr Some implementations, especially UNIX derivatives, require separate IP
network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the
IP address assigned to the WAN port of your Prestige.
NOTE: Refers to local Prestige address, not the remote router address.
NAT Press [SPACE BAR] and then [ENTER] to select Full Feature if you
have multiple public WAN IP addresses for your Prestige.
SUA Only
Select SUA Only if you have just one public WAN IP address for your
Prestige. The SMT uses Address Mapping Set 255 (menu 15.1 - see
section
32.3.1 ).
Select None to disable NAT.
Address
Mapping Set When Full Feature is selected in the NAT field, configure address
mapping sets in menu 15.1. Select one of the NAT server sets (2-10) in
menu 15.2 (see
the NAT chapter for details) and type that number here.
When SUA Only is selected in the NAT field, the SMT uses NAT server
set 1 in menu 15.2 (see the NAT chapter for details).
2
Metric The metric represents the “cost” of transmission for routing purposes. IP
routing uses hop count as the cost measurement, with a minimum of 1
for directly connected networks. Type a number that approximates the
cost for this link. The number need not be precise, but it must be
between 1 and 15. In practice, 2 or 3 is usually a good number. 2
Private This determines if the Prestige will include the route to this remote node
in its RIP broadcasts. If set to
Yes , this route is kept private and not
included in RIP broadcast. If No , the route to this remote node will be
propagated to other hosts through RIP broadcasts.
No