ZyXEL Communications P-660HN-F1A, User Manual

Page: 99 / 430

Chapter 5 Internet and Wireless Setup Wizard
P-660HN-F1A User’s Guide
99
3
Configure your wireless settings in this screen. Click Next.
Figure 26 Wireless LAN
The following table describes the labels in this screen.
Next Click this to continue to the next wizard screen.
Exit Click this to close the wizard screen without saving.
Table 15 Wireless LAN Setup Wizard 1
LABEL DESCRIPTION
Table 16 Wireless LAN Setup Wizard 2
LABEL DESCRIPTION
Network
Name(SSID) Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the P-660HN-F1A, make sure all wireless
stations use the same SSID in order to access the network.
Channel
Selection The range of radio frequencies used by IEEE 802.11b/g wireless devices is
called a channel. Select a channel ID that is not already in use by a
neighboring device.
Security Select Manually assign a WPA-PSK key to configure a Pre-Shared Key
(WPA-PSK). Choose this option only if your wireless clients support WPA.
See
Section 5.3.1 on page 100 for more information.
Select Manually assign a WEP key to configure a WEP Key. See Section
5.3.2 on page 101 for more information.
Select Disable wireless security to have no wireless LAN security
configured and your network is accessible to any wireless networking
device that is within range.
Back Click this to return to the previous screen without saving.