ZyXEL Communications P-660HN-F1A, User Manual

Page: 284 / 430

Chapter 18 Remote Management
P-660HN-F1A User’s Guide
284
18.5.1 Configuring SNMP
To change your P-660HN-F1A’s SNMP settings, click Advanced > Remote MGMT
> SNMP tab. The screen appears as shown. Use this screen to configure your
SNMP settings.
Figure 124 Advanced > Remote MGMT > SNMP
The following table describes the labels in this screen.
Table 87 Advanced > Remote MGMT > SNMP
LABEL DESCRIPTION
Port The SNMP agent listens on port 161 by default. If you change the SNMP
server port to a different number on the P-660HN-F1A, for example
8161, then you must notify people who need to access the P-660HN-F1A
SNMP agent to use the same port.
Access Status Select the interface(s) through which a computer may access the P-
660HN-F1A using this service.
Secured Client
IP A secured client is a “trusted” computer that is allowed to access the
SNMP agent on the P-660HN-F1A.
Select All to allow any computer to access the SNMP agent.
Choose Selected to just allow the computer with the IP address that you
specify to access the SNMP agent.
Get
Community Enter the Get Community, which is the password for the incoming Get
and GetNext requests from the management station. The default is
public and allows all requests.