ZyXEL Communications P-660HN-F1A User Manual Download Page 159

Page: 159 / 430

Chapter 8 Wireless LAN

P-660HN-F1A User’s Guide

159

The following table describes the labels in this screen.

8.7 Wireless LAN Technical Reference

This section discusses wireless LANs in depth. For more information, see the
appendix.

8.7.1 Wireless Network Overview

Wireless networks consist of wireless clients, access points and bridges.

• A wireless client is a radio connected to a user’s computer.
• An access point is a radio with a wired connection to a network, which can

connect with numerous wireless clients and let them access the network.

• A bridge is a radio that relays communications between access points and

wireless clients, extending a network’s range.

Traditionally, a wireless network operates in one of two ways.

• An “infrastructure” type of network has one or more access points and one or

more wireless clients. The wireless clients connect to the access points.

• An “ad-hoc” type of network is one in which there is no access point. Wireless

clients connect to one another in order to exchange information.

Table 41

Network > Wireless LAN > QoS

LABEL

DESCRIPTION

Enable
Wireless LAN
Scheduling

Select this box to activate wireless LAN scheduling on your P-660HN-
F1A.

WLAN status

Select On or Off to enable or disable the wireless LAN.

Day

Check the day(s) you want to turn the wireless LAN on or off.

The following
times

Specify a time frame during which the schedule would apply.

For example, if you set the time range from 12:00 to 23:00, the wireless
LAN will be turned on only during this time period.

Apply

Click this to save your changes.

Reset

Click this to restore your previously saved settings.

Summary of Contents for P-660HN-F1A















































































































































































































































































































































































































































Search results

Summary of Contents for P-660HN-F1A

Reviews:

Brands by name

Popular brands

ZyXEL Communications P-660HN-F1A, User Manual

Search results

Summary of Contents for P-660HN-F1A

Reviews:

Brands by name

Popular brands