manualshive.com logo in svg

ZyXEL Communications P-660HN-F1A, User Manual

Share
Download
ZyXEL Communications P-660HN-F1A User Manual Download Page 109

 Chapter 6 WAN Setup

P-660HN-F1A User’s Guide

109

IP Address

This option is available if you select Routing in the Mode field.

A static IP address is a fixed IP that your ISP gives you. A dynamic IP 
address is not fixed; the ISP assigns you a different one each time you 
connect to the Internet. 

Select Obtain an IP Address Automatically if you have a dynamic 
IP address; otherwise select Static IP Address and type your ISP 
assigned IP address in the IP Address field below. 

Subnet Mask 

This option is available if you select ENET ENCAP in the 
Encapsulation field.

Enter a subnet mask in dotted decimal notation. 

Gateway IP 

address

This option is available if you select ENET ENCAP in the 
Encapsulation field.

Specify a gateway IP address (supplied by your ISP).

DNS Server
First DNS Server

Second DNS 
Server

Third DNS Server

Select Obtained From ISP if your ISP dynamically assigns DNS 
server information (and the P-660HN-F1A's WAN IP address) and you 
select Obtain an IP Address Automatically.

Select User-Defined if you have the IP address of a DNS server. 
Enter the DNS server's IP address in the field to the right. If you chose 
User-Defined, but leave the IP address set to 0.0.0.0, User-
Defined changes to None after you click Apply. If you set a second 
choice to User-Defined, and enter the same IP address, the second 
User-Defined changes to None after you click Apply. 

Select None if you do not want to configure DNS servers. You must 
have another DNS server on your LAN, or else the computers must 
have their DNS server addresses manually configured. If you do not 
configure a DNS server, you must know the IP address of a computer 
in order to access it.

Connection (PPPoA and PPPoE encapsulation only)
Nailed-Up 
Connection

Select Nailed-Up Connection when you want your connection up all 
the time. The P-660HN-F1A will try to bring up the connection 
automatically if it is disconnected.

Connect on 
Demand

Select Connect on Demand when you don't want the connection up 
all the time and specify an idle time-out in the Max Idle Timeout 
field.

Max Idle Timeout Specify an idle time-out in the Max Idle Timeout field when you 

select Connect on Demand. The default setting is 0, which means 
the Internet session will not timeout.

Apply

Click this to save your changes. 

Cancel

Click this to restore your previously saved settings.

Advanced Setup

Click this to display the Advanced WAN Setup screen and edit more 
details of your WAN setup.

Table 19   

Network > WAN > Internet Access Setup (continued)

LABEL

DESCRIPTION

Summary of Contents for P-660HN-F1A















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands