ZyXEL Communications P-660HN-F1A, User Manual

Page: 266 / 430

Chapter 16 Quality of Service (QoS)
P-660HN-F1A User’s Guide
266
16.8 The Queue Setup Screen
Use this screen to view or modify the P-660HN-F1A’s Queue Setup. Click
Advanced > QoS > Queue Setup. The screen appears as shown.
The following table describes the labels in this screen.
Table 78 QoS Queue Setup
LABEL DESCRIPTION
Interface Select through which interface traffic of this queue should go.
No This is the index number of this entry.
Active Select the check box to enable the queue.
Priority This shows the priority of this queue.
Weight This shows the weight of this queue.
Weight in
Percent This shows the weight of this queue in percentage of all queues with the
same priority.
Shaping Rate
(kbps) This shows the maximum transmission rate allowed for traffic on this
queue.
Bucket
Size(Bytes) This shows the size of the bucket, which is the maximum amount of bytes
that tokens can be available for instantaneously.
Drop
Algorithms This shows the queue management algorithm used for this queue.
Modify Click the Edit icon to go to the screen where you can edit the queue.
Click the Remove icon to delete an existing queue. Note that subsequent
rules move up by one when you take this action.
Apply Click Apply to save your changes back to the P-660HN-F1A.
Cancel Click Cancel to begin configuring this screen afresh.