ZyXEL Communications P-660HN-F1A, User Manual

Page: 48 / 430

Chapter 4 Tutorials
P-660HN-F1A User’s Guide
48
3
In the wireless client utility, go to the WPS setting page. Enable WPS and press
the WPS button (Start or WPS button).
4
Push and hold the WPS button located on the P-660HN-F1A’s rear panel for more
than 1 second until the LED turns orange. Alternatively, you may log into P-
660HN-F1A’s web configurator and click the Push Button in the Network >
Wireless LAN > WPS Station screen.
Note: Your P-660HN-F1A has a WPS button located on its rear panel as well as a
WPS button in its configuration utility. Both buttons have exactly the same
function: you can use one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second
button within two minutes of pressing the first one.
The P-660HN-F1A sends the proper configuration settings to the wireless client.
This may take up to two minutes. The wireless client is then able to communicate
with the P-660HN-F1A securely.