manualshive.com logo in svg

ZyXEL Communications P-660HN-F1A, User Manual

Share
Download
ZyXEL Communications P-660HN-F1A User Manual Download Page 205

 Chapter 10 Firewalls

P-660HN-F1A User’s Guide

205

10.5  Firewall Technical Reference

This section provides some technical background information about the topics 
covered in this chapter.

10.5.1  Firewall Rules Overview

Your customized rules take precedence and override the P-660HN-F1A’s default 
settings. The P-660HN-F1A checks the source IP address, destination IP address 
and IP protocol type of network traffic against the firewall rules (in the order you 
list them). When the traffic matches a rule, the P-660HN-F1A takes the action 
specified in the rule. 

Firewall rules are grouped based on the direction of travel of packets to which they 
apply: 

Note: The LAN includes both the LAN port and the WLAN.

By default, the P-660HN-F1A’s stateful packet inspection allows packets traveling 
in the following directions:

• LAN  to  LAN/  Router 

These rules specify which computers on the LAN can manage the P-660HN-F1A 

(remote management) and communicate between networks or subnets 

connected to the LAN interface (IP alias). 

Note: You can also configure the remote management settings to allow only a specific 

computer to manage the P-660HN-F1A.

• LAN  to  WAN

These rules specify which computers on the LAN can access which computers or 

services on the WAN.

By default, the P-660HN-F1A’s stateful packet inspection drops packets traveling 
in the following directions:

• WAN  to  LAN

These rules specify which computers on the WAN can access which computers 

or services on the LAN. 

Note: You also need to configure NAT port forwarding (or full featured NAT address 

mapping rules) to allow computers on the WAN to access devices on the LAN.

• LAN  to  LAN/  Router

• WAN  to  LAN

• LAN to WAN

• WAN to WAN/ Router

Summary of Contents for P-660HN-F1A















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands