ZyXEL Communications P-660HN-F1A User Manual Download Page 356

Page: 356 / 430

Appendix A Setting up Your Computer’s IP Address

P-660HN-F1A User’s Guide

356

Click the DNS Configuration tab.

• If you do not know your DNS information, select Disable DNS.
• If you know your DNS information, select Enable DNS and type the

information in the fields below (you may not need to fill them all in).

Figure 151

Windows 95/98/Me: TCP/IP Properties: DNS Configuration

Click the Gateway tab.

• If you do not know your gateway’s IP address, remove previously installed

gateways.

• If you have a gateway IP address, type it in the New gateway field and click

Add.

Click OK to save and close the TCP/IP Properties window.

Click OK to close the Network window. Insert the Windows CD if prompted.

Turn on your P-660HN-F1A and restart your computer when prompted.

Verifying Settings

Click Start and then Run.

In the Run window, type "winipcfg" and then click OK to open the IP
Configuration window.

Select your network adapter. You should see your computer's IP address, subnet
mask and default gateway.

Summary of Contents for P-660HN-F1A















































































































































































































































































































































































































































Search results

Summary of Contents for P-660HN-F1A

Reviews:

Brands by name

Popular brands

ZyXEL Communications P-660HN-F1A, User Manual

Search results

Summary of Contents for P-660HN-F1A

Reviews:

Brands by name

Popular brands