manualshive.com logo in svg

Zte ZXG10 BS21, Maintenance Manual

Share
Download
Zte ZXG10 BS21 Maintenance Manual Download Page 120

 
 ZXG10 BS21 (V2.2) Compact Outdoor BTS for GSM  Maintenance Manual 

106 

Confidential and Proprietary Information of ZTE CORPORATION 

Alarm influence: If the ETRM with the DSP0 is the BCCH carrier, the 

cell will not work normally. If not, the affected two physical channels of 
the ETRM cannot work normally, but the other channels can. 
Alarm unit location type: FU. 

3.

 

Cause 
DSP software or hardware is in error. 

4.

 

Handling method 
i.

 

Download the DSP software again. 

ii.

 

Reset the ETRM frame and restart the DSP unit. Check whether the 
alarm is recovered. If the alarm is recovered, the DSP initialization 

failure is generally caused by strong external interference, and the 
ETRM unit can still work normally. If the alarm cannot be recovered, 

replace the corresponding ETRM module. 

5.

 

Verification 
This alarm does not appear in the OMCR alarm interface. 

6.

 

Precautions 
If the alarm affects the BCCH carrier, handle it immediately. If it 

affects the TCH carrier only, handle it as soon as possible. Otherwise, 
the traffic capacity of the cell will be affected. 
 
 
 

TPU’s CHP DSP1~3 Initialization Failure 

1.

 

Description 
TPU’s CHP DSP1~3 initialization fails. 

2.

 

Related information 
Alarm code: 0X1B05, 0X1B06, 0X1B07. 
Alarm level: 3. 
Alarm influence: Two timeslots of the ETRM will not work normally. 
That is, two physical channels of the ETRM cannot be used, which will 

affect the traffic capacity of the cell. 
Alarm unit location type: FU 
Internal handling flow: If the BTS has another ETRM module, configure 
the BCCH into another ETRM. 

3.

 

Cause 
DSP software or hardware is wrong. 

4.

 

Handling method 
i.

 

Download the DSP software again. 

ii.

 

Reset the ETRM frame and restart the DSP unit. Check whether the 

alarm is recovered. If the alarm is recovered, the DSP initialization 

Summary of Contents for ZXG10 BS21


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands