Zoom 5354, User Manual

Page: 99 / 143

99
Regulatory Mode By default is Off. Most users will not need to change this setting.
TPC Mitigation
(db) By default is Off. Most users will not need to change this setting.
OBSS
Coexistence By default is set to 1 (Enabled). This allows the wireless
bandwidth to fall back from 40Mhz to 20Mhz when the
modem/router detects interference in the area. You may select 0
(Disabled) to disable this feature. Disabling OBSS Coexistence
can result in poor wireless performance if there is interference in
your area. Most users will not need to change these settings.
STBC Tx By default is set to Auto. Most users will not need to change this
setting.
Restore Wireless
Defaults Click on the Restore Wireless Defaults button to restore the
Wireless settings.
Table 25. Country Extension Channel List
Control Channel Sideband for
Control
Channel
Extension
Channel
US Channel 1-7 Lower Channel
4
US Channel 5-11 Upper Channel
Number - 4
Example 1 : If your control channel is set to 1, the extension channel will be transmitted
on channel 5. The total bandwidth of the signals on channel 1 and 5 equals 40 MHz.
Example 2 : If your control channel is set to 11, the extension channel will be transmitted
on channel 7. The total bandwidth of the signals on channel 11 and 7 equals 40 MHz.
Primary Network
The Primary Network page allows you to configure the primary wireless network and its
security settings. Strong security is the best way to prevent unauthorized wireless
network access. To access the
Primary Network page:
1
Click Wireless in the menu bar.
2
Then click the Primary Network submenu.
Figure 31 shows an example of the menu and Table 24 describes the items you can
select.