75
Figure 20. Example of Forwarding Page
To activate the port forwarding:
1
Enter the port range of the Internet traffic that you want to forward, and the IP
address of the server to which you want to forward that traffic.
2
Select the protocol(s) to be forwarded.
3
Check the
Enable
box to the bottom of the entry to store settings.
4
Click the
Apply
button to activate the forwarding rules.
Table 14. Forwarding Menu Option
Option
Description
External IP
Address
Enter the External IP address of the device that you want to allow
access to your network. If you do not know the address you can
leave this field blank.
Note:
The External IP Address is not the CM
WAN IP address shown on the status page. It is the address of the
remote device.
External
Start/End Port
Enter the range of port numbers (start and end port) from the
external device that you want to allow onto your network. If you do
not know the address you can leave this field blank
Local IP
Enter the IP address to which forwarded traffic should be sent. If you
Summary of Contents for 5354
