71
To activate the IP address filter:
1
Enter the last byte (the numbers after the last period) of the IP address in
Start
Address
and
End Address
.
2
Check the
Enable
box to the right of the entry to store settings.
3
Click the
Apply
button to activate the filter rules.
Table 11. IP Filtering Menu Option
Option
Description
Start/End
Address
Enter the last byte of the IP address. The upper bytes of the IP
address are set automatically from the Cable Modem/Router IP
address.
Enable
To activate the IP address filter, you must also check the
Enable
box
and click
Apply
. You can disable this filter while retaining the
addresses you entered for later use.
MAC Filtering
The MAC Filtering page allows you to configure MAC address filters in order to block
Internet traffic to specific network devices on your LAN.
To access the
MAC Filtering
page:
1
Click
Advanced
in the menu bar.
2
Then click the
MAC Filtering
submenu.
Figure 18 shows an example of the menu and Table 10 describes the items you can
select.
Summary of Contents for 5354
