Zoom 5354, User Manual

Page: 139 / 143

139
5
Be sure to click Apply after you change the channel. All devices
connecting wirelessly will automatically switch to the new channel.

If changing the wireless channel did not help, you should reduce the
amount of bandwidth your wireless connection is using from 40 Mhz to
20 Mhz on the same
wireless page.

Move the device trying to access the Cable Modem/Router to a different
location, ideally closer to the Cable Modem/Router.

If possible, move the Cable Modem/Router to a new location, ideally
closer to the wireless device.

For some computers and some tablets, try deleting the old network
settings including the SSID and password/pre-shared key. After you do
that, use the new settings. Normally the new settings should be the
modem/router’s default settings as discussed above.

Refer to your computer’s or other device’s documentation if necessary.
Problem: I followed the instructions for connecting the Modem/Router and
entered http://192.168.0.1 in my web browser’s address bar, but I
cannot access the Modem/Router. (The Logon page does not
appear).
Solution: Try the following:

Verify that power is on to the Modem/Router and that the Ethernet
cable is plugged between your Modem/Router and your computer’s
Ethernet (LAN) port.

The computer connected to the Modem/Router must have it's TCP/IP
parameters setup to use DHCP (also called Dynamic IP). Check that
your computer is setup to use DHCP.
Problem: I don’t know my Cable Modem/Router’s SSID or Password.
Solution:
The default values are printed on the back label of the modem/router.
Use these unless you changed them.
If you changed the default SSID and password, connect a computer to
any Ethernet port of the modem, open the computer’s Web browser, enter