43
8
Select
TCP
in the
Protocol
drop down menu since these ports use TCP.
9
Enter a name for this rule, for example WOW1. Click
Enable
then click
Apply
. Your
new rule will appear in the table.
10
Repeat steps 7-9 for the next rule. In this case only one port is used, 3724. Enter
3724 in the
Trigger Start/End Port
and
Target Start/End Port
fields.
11
Repeat steps 7-9 for the remaining ports that need to be opened. When you are
complete the table should look like this:
If your online game does not work and you are sure that you entered the correct ports
on the port triggering page, check to see if you have a firewall running on your
computer that is preventing you from playing your online game. This firewall may be
either the built-in Windows firewall or may be part of a third party security package
you are using on your computer. You will need to allow access through these
firewalls to be able to play your online game.
Summary of Contents for 5354
