Zoom 5354 User Manual Download

Page: 128 / 143

128

Figure 43. Example of Approved Devices page

Table 38. Approved Devices Menu Option

Option

Description

Enable USB
Devices
connected to the
USB port

Select from the following options:

All

: Select ALL to allow all USB devices connected to the USB

port.

Approved

: Select to allow only approved USB devices to connect

to the USB port.

None

: Select to prevent any USB devices from connecting to the

USB port.

Available USB
Device

Displays the USB devices that the residential gateway supports.
The following data is shown for each device:

Volume Name

: Name of the device

Manufacturer:

Manufacturer of the USB device.

Free Space

: Free space remaining on the USB device.

Used Space

: Used space on the USB device.

Summary of Contents for 5354
















































































































































Search results

Summary of Contents for 5354

Reviews:

Related manuals for 5354

Brands by name

Popular brands

Zoom 5354, User Manual

Search results

Summary of Contents for 5354

Reviews:

Related manuals for 5354

Brands by name

Popular brands