124
Table 35. L2TP/PPTP Menu Option
Option
Description
PPP Address Range
(Start/End)
Configure the dedicated IP address pool for L2TP/PPTP. The
LAN IP subnet at one end of the VPN tunnel must be different
from the LAN.
IP subnet at the other end of the VPN tunnel. For example, if
one side’s LAN subnet is 192.168.
0
.x, then the other side
should be 192.168.
1
.x (where the subnet mask in this
example is 255.255.255.0).
PPP Security (MPPE
Encryption)
Select Enable to enable MPPE (Microsoft Point-to-Point
Encryption). MPPE is used to enhance the confidentiality of
PPP-encapsulated packets. It uses the RSA RC4 encryption
algorithm.
Username
Enter the user name for the L2TP or PPTP tunneling.
Password
Enter the password for the L2TP or PPTP tunneling.
Confirm Password
Re-enter to confirm the password.
User List
Show the existing user list.
L2TP Server
(Preshared Phrase)
Enter a key (Pre-Shared key) for authentication. This key is
used by IPSec to validate the computer as a trusted machine.
Event Log
The Event Log page shows the VPN event log.
To access the
Event Log
page:
1
Click
VPN
in the menu bar.
2
Then click the
Event Log
submenu.
Figure 41 shows an example of the menu and Table 33 describes the items you can
select.
Summary of Contents for 5354
