78
Enabled
Select ON to enable the rule. For security reasons you should leave
the rule disabled if you are not using it.
DMZ Host
The DMZ (De-militarized Zone) Host page allows you to configure a network device (e.g.
a PC) to be exposed or visible directly to the Internet. This may be used if an application
doesn’t work with port triggers. If you have an application that won’t run properly behind
the NAT firewall, you can configure it for unrestricted two-way Internet access by defining
it as a virtual DMZ host. Adding a client to the DMZ may expose your local network to
various security risks because the client is not protected, so use this option as a last
resort.
To access the
DMZ Host
page:
1
Click
Advanced
in the menu bar.
2
Then click the
DMZ Host
submenu.
Figure 22 shows an example of the menu.
Figure 22. Example of DMZ Host Page
Summary of Contents for 5354
