3D printing workflow
63
12.5 Filament replacement during printing
Single Plastic Extruder
This function allows you to change the filament during the printing process. The new
filament must be of the same material as the new one (PLA/PLA) because the tempera-
ture of the extruder will be the same as for the filament that was there before.
Tap the "Left" gap in the
"Target: column.
Tap the needed tempera-
ture on the keyboard,
then OK.
Since the Dual PRO
toolhead has one nozzle,
the set up temperature
adjusts for left and right
filament. Wait the extrud-
er to heat up.
Tap the "Settings" menu.
Choose "MORE".
Choose "Filament
Change".
Go to the LOAD/UNLOAD
menu.
Feed the extruder by fol-
lowing steps from
.