3D printing workflow
58
12.3 Removing the filament
Single Plastic Extruder
To preheat the extruder, follow these steps.
Choose the "Mainte-
nance" from the LCD
touchscreen menu.
Choose "Load Filament".
Choose PARK TOOL, wait
for the machine to posi-
tion the toolhead. When
done, choose "PLA" to
preheat the material.
Wait till extruder reaches
the proper temperature.
The yellow HEATING sign
will change colour from
yellow to green.
Tap the LOAD/UNLOAD
menu.
Tap the upper arrow on
the screen to remove 80
mm of the filament. At
first, extruder will load 40
mm to prevent clogging.
Repeat if needed.
NOTE:
By triggering the button showing ‘80 mm’ you can change the amount of extrud-
ed filament to 15 mm or 5 mm.
