3D printing workflow
64
Wait until the extruder
stops printing and lifts
itself up.
Tap the "HEATING" menu
and check if the extruder
has the right tempera-
ture.
Tap the "LOAD/UNLOAD"
menu.
Tap the upper arrow on
the screen to remove 80
mm of the filament. At
first, extruder will load 40
mm to prevent clogging.
Repeat if needed.
Insert new filament gen-
tly into the guide.
Tap the bottom arrow
on the screen to feed
80 mm of the filament.
Choose down arrow with
LEFT description to do
that.
Push the filament down
until you feel it has been
grabbed by the extruder
drive gear.
Wait until the material
flows out of the nozzle.
Tap the feed button
again if necessary.
Remove the extruded
material. Click "DONE",
the extruder will contin-
ue work from where it
stopped.
NOTE:
Sometimes after clicking "DONE" the machine won't resume the work, in those
cases repeat the feeding by pressing one more time the "LEFT" down button and after
the extruder stops the feeding process press the "DONE" button.
