Zmorph VX Product Manual Download Page 157

Page: 157 / 163

Firmware upgrades

157

18.2 Updating firmware

Message about firmware

update detection should

appear and the 30 sec-

onds countdown should

start. After this time the

update will begin auto-

matically. Choose "Yes"

to proceed and skip

countdown.

The machine will start

updating the firmware.

You must not remove the

SD card, turn off or reset

the printer during

this process.

After update finishes, the

machine should restart

itself.

Prepare a SD card.

Download the newest

firmware archive file

with .zip extension from

Zmorph Knowledge

Base.

Extract files from from

downloaded archive.

From the extracted folder

copy the LCD folder and

FIRMWARE.bin and place

it in the main

directory of the SD card.

Make sure that machine

is powered on. If not,

turn it on by pushing the

power button.

Insert the SD card into

the slot located next to

the LCD screen.

Summary of Contents for VX




































































































































































Search results

Summary of Contents for VX

Reviews:

Related manuals for VX

Brands by name

Popular brands

Zmorph VX, Product Manual

Search results

Summary of Contents for VX

Reviews:

Related manuals for VX

Brands by name

Popular brands